Mitchell H. Kline
Electrical Engineering and Computer Sciences, UC Berkeley
BSAC Graduate Researcher
Dissertation Presentation
Decemer 17, 2013 | 12:30 to 01:30 | 540 Cory Hall
Host: Bernhard Boser
Dissertation Presentation MEMS gyroscopes for consumer devices, such as smartphones and tablets, suffer from high power consumption and drift, which precludes their use in inertial navigation applications. Conventional MEMS gyroscopes detect Coriolis force through measurement of very small displacements on a sense axis, which requires low-noise, and consequent high-power, electronics. The sensitivity of the gyroscope is improved through mode-matching, but this introduces many other problems, such as low bandwidth and unreliable scale factor. Additionally, the conventional Coriolis force detection method is very sensitive to asymmetries in the mechanical transducer because the rate signal is derived from only the sense axis. Parasitic coupling between the drive and sense axis introduces unwanted bias errors which could be rejected by a perfectly symmetric readout scheme. In this talk, I will present frequency modulated (FM) gyroscopes that overcome the above limitations. FM gyroscopes operate the mechanical transducer in a perfectly symmetric way: each transducer axis is continuously driven to maintain a constant envelope oscillation. The rate is detected as changes in the frequencies of oscillations of the two axes. Frequency readout offers superior scale factor reliability in comparison to amplitude readout. For pendulum type gyroscopes, the scale factor is a dimensionless constant equal to 1 Hz per 360 deg/s. FM gyroscopes are trivial to mode-match. Oscillation frequencies of both axes can be continually monitored and matched through electrostatic tuning. The FM gyroscope receives the same improved sensitivity benefit from mode-matching as the conventional gyroscope, without the drawbacks of limited bandwidth or unreliable scale factor. Because of the symmetry, compatibility with mode-matching, and ease of frequency readout, the FM gyroscopes promise to improve the power dissipation and drift of MEMS gyroscopes. I will present results demonstrating FM gyroscope operation on a number of MEMS gyroscopes designed at Berkeley.
www.eecs.berkeley.edu/~boser/research.html
Interested in nominating someone to speak at the BSAC Technology Seminar? We welcome you to submit a speaker nomination here