Alper Ozgurluk
Department of Electrical Engineering and Computer Sciences, UC Berkeley
BSAC Graduate Researcher, Clark Nguyen Group
August 14, 2018 | 12:00 to 01:00 | 490 Cory Hall
Host: Michael Cable
Introduction of tensile stress via localized Joule heating has yielded some of the highest metal MEMS resonator Q's measured to date, as high as 48,919 for a 12-MHz ruthenium micromechanical clamped-clamped beam ("CC-beam"). The high Q's continue into the VHF range, with Q's of 7,202 and 4,904 at 61 and 70 MHz, respectively. These marks are substantially higher than the 6,000 at 10 MHz and 300 at 70 MHz previously measured for polysilicon CC-beams, defying the common belief that metal Q cannot compete with conventional micromachinable materials.
The low-temperature ruthenium metal process, with highest temperature of 450°C and paths to an even lower ceiling of 200°C, further allows for MEMS post-processing directly over finished foundry CMOS wafers, thereby offering a promising route towards fully monolithic realization of CMOS-MEMS circuits, such as needed in communication transceivers. This, together with its higher Q, may eventually make ruthenium metal preferable over polysilicon in some applications. bsac.berkeley.edu/rsscast
VIEW PRESENTATION
---
Interested in nominating someone to speak at the BSAC Technology Seminar? We welcome you to submit a speaker nomination here